The motor-driven plunger metering pump Makro/5 is characterised by its modular design for add-ons. With the option of one or two liquid ends and one or several add-on pumps, its performance can be enhanced up to a maximum of 20,000 l/h.
Advantages
- High processing reliability: Powerful, reliable and extremely robust
- High processing quality: Reproducibility of dosage better than ±0.5 %
- Broad field of application, easily adapted later even by the customer because of its modular design.
Areas of application
- Dosing of treatment agents in industrial production technology
- Dosing of additives in the chemical and petrochemical industry, e.g. dosing of glycol in the delivery of natural gas
Features
- The drive unit is designed for operating two liquid ends with an output of 2 x 6,000 l/h
- Can be increased to 20,000 l/h by adding up to three add-on pumps, and with reduced back pressure up to four add-on pumps (the use of an installation frame is necessary).
- Back pressure 6 – 320 bar
- Push-pull operation of the liquid ends with dual head designs
- Standard drive: Dual wound three-phase motor 3 kW (optional 5.5 KW), 230/400 V, 50/60 Hz, enclosure class rated IP 55 (optional ATEX-T3/T4), insulation class F
- Stroke displacement 0-50 mm
- Stroke length setting: manual (optional with variable speed drive)
- Optional electronic frequency converter for speed control, enclosure class rated IP54, with monitor for monitoring the temperature of the motor
- Optional stroke sensor with NAMUR signal for exact recording of each dosing stroke, suitable for batch dosing or proportional dosing
- Gear housing: Cast iron, resistant to seawater, acrylic resin lacquer finish
- Plunger liquid ends made of stainless steel 1.4571
- Ceramic oxide ceramic or stainless steel plungers with ceramic coating for protection against wear
- Reproducibility of dosing better under defined conditions and correct installation ± 0.5 % (stroke length 10-100%)
- Suction lift varies with density and viscosity of the medium as well as the connecting pipework and the number of strokes
Technical Data for the Main Pump
Pump type
Makro M5Ka |
Capacity at
max. counter-pressure |
max.
stroke frequency |
Connectorsuction/
pressure side |
Shipping
weight |
| bar |
l/h |
ml/Hub |
strokes/min. |
G-DN |
kg |
| 3200038 |
320 |
38 |
11,3 |
60 |
Rp¼"- 8 |
298,5 |
| 3200048 |
320 |
48 |
11,3 |
75 |
Rp¼"- 8 |
298,5 |
| 3200066 |
320 |
66 |
11,3 |
103 |
Rp¼"- 8 |
298,5 |
| 3200085 |
320 |
85 |
11,3 |
133 |
Rp¼"- 8 |
298,5 |
| 3200100 |
320 |
100 |
11,3 |
156 |
Rp¼"- 8 |
298,5 |
| 0800214 |
80 |
214 |
62,8 |
60 |
1¼"-20 |
303,5 |
| 0800268 |
80 |
268 |
62,8 |
75 |
1¼"-20 |
303,5 |
| 0800368 |
80 |
368 |
62,8 |
103 |
1¼"-20 |
303,5 |
| 0700476 |
70 |
476 |
62,8 |
133 |
1¼"-20 |
303,5 |
| 0560558 |
56 |
558 |
62,8 |
156 |
1¼"-20 |
303,5 |
| 0250658 |
25 |
658 |
192 |
60 |
1½"-25 |
311 |
| 0250822 |
25 |
822 |
192 |
75 |
1½"-25 |
311 |
| 0251129 |
25 |
1129 |
192 |
103 |
1½"-25 |
311 |
| 0231458 |
23 |
1458 |
192 |
133 |
1½"-25 |
311 |
| 0181710 |
18 |
1710 |
192 |
156 |
1½"-25 |
311 |
| 0121343 |
12 |
1343 |
392 |
60 |
2½"-50 |
331,5 |
| 0121678 |
12 |
1678 |
392 |
75 |
2½"-50 |
331,5 |
| 0122305 |
12 |
2305 |
392 |
103 |
2½"-50 |
331,5 |
| 0122977 |
12 |
2977 |
392 |
133 |
2½"-50 |
331,5 |
| 0103491 |
10 |
3491 |
392 |
156 |
2½"-50 |
331,5 |
| 0062269 |
6 |
2269 |
663 |
60 |
2¾"-60 |
350 |
| 0062837 |
6 |
2837 |
663 |
75 |
2¾"-60 |
350 |
| 0063896 |
6 |
3896 |
663 |
103 |
2¾"-60 |
350 |
| 0065031 |
6 |
5031 |
663 |
133 |
2¾"-60 |
350 |
| 0066000 |
6 |
6000 |
663 |
156 |
2¾"-60 |
350 |
Materials in touch with media at liquid end version
Pump type
Makro/ 5 M5Ka |
Liquid end |
Suction pressure
connector |
Ball seats
/seals |
Valve balls |
Plungers |
...12 S up to
30 S |
stainless steel 1.4571 |
1.4571 |
SS/PTFE |
Oxide ceramic |
Stainless steel/ceramic |
...40 S up to
70 S |
stainless steel 1.4571 |
1.4581 |
PTFE/PTFE |
Stainless steel 1.4401 |
Stainless steel/ceramic |
...85 S up to
130 S |
stainless steel 1.4571 |
1.4581 |
PTFE/PTFE |
Hast. C
(valve plate) |
Stainless steel/ceramic |
Other types available on request |