gamma/ L Diaphragm Metering Pump

The gamma/ L is the world's first calibrateable pump of its performance class. The metered quantity is directly displayed in l/h. The large illuminated LC display makes sure that all displayed variables are simple to read. The integrated 2-week Process-Timer (optional) offers an extremely wide range of application possibilities.

Advantages

• No metering errors: direct clear text settings and feed rate monitoring.
• Cost and space-savings thanks to integrated 2-week process timer. The intelligent alternative to the time switch.
• Easy-to-read values thanks to the large backlit LC display – even in tricky viewing conditions.
• Problem-free connection to interface complex process feed systems with optional PROFIBUS®-DP
  interface.
• Level monitoring of the chemicals via an input for a two-stage float-type level switch with early warning function

Applications

• Highly automated processes in nearly all industries
• Cooling water circulations: dosing of biocides, corrosion inhibitors, defoamers and other additives
• Chemical industry, e.g. in mini-plants

Features

• Capacity range 0.74 - 32 l/h, 16 - 2 bar
• Continuous stroke length adjustment from 0 - 100%
• Digitally accurate stroking rate via keypad and large LC display
• Feed rate display in strokes/min. or l/h
• Programmable pressure levels
• 3-LED-Display for on/off, warning, and error
• Liquid end materials: PP, Acrylic/PVC, PVDF, PTFE, stainless steel
• Patented coarse/fine bleeding on PP, Acrylic/PVC and PVDF
• Self-bleeding liquid end version in PP and Acrylic/PVC
• HV liquid end for highly viscous media
• Dosing monitor input, adjustable error stroke counter
• External control via voltage free contact with optional increase/decrease pulse function
• Optional external control via standard signal 0/4 - 20 mA
• Two level float switch connector
• Optional 14 day process timer
• Protection class IP65
• Low Voltage 12-24 V DC, 24 V AC/DC Option
• Optional concentration entry for proportional flow dosing
• Interface for PROFIBUS®-DP

Material Options for Liquid Ends

• Polypropylene: The low-cost alternative, resistant to many acids and alkaline solutions. This material is typically used in water treatment applications.
• Acrylic Glass: Offers outstanding resistance to chlorine bleaching solutions and is a transparent liquid end material. This offers the advantage to observe the pumping process in the liquid end. Air inclusions or crystalline deposits that may interrupt the metering process can be detected and removed.
• PVDF: Resistant to concentrated or oxidizing acids and alkaline solutions. A less expensive alternative to PTFE.
• PTFE: Best suited to meter highly concentrated or oxidizing acids and alkaline solutions
• Stainless Steel: For metering solvents and liquids containing oil

For gas-emitting media self-bleeding liquid end versions are available in polypropylene and acrylic glass.

Technical Data

pump type gamma/ L	bar	l/h	strokes/min	Suction lift mWG	Connector Dimensions outer Ø × inner Ø mm
GALa 1000	10	0.74	180	6	6 × 4
GALa 1601	16	1.1	180	6	6 × 4
GALa 1602	16	2.1	180	6	6 × 4
GALa 1005	10	4.4	180	6	8 × 5
GALa 0708	7	7.1	180	6	8 × 5
GALa 0413	4	12.3	180	3	8 × 5
GALa 0220	2	19.0	180	2	12 × 9
GALa 1605	16	4.1	180	6	8 × 5
GALa 1008	10	6.8	180	6	8 × 5
GALa 0713	7	11.0	180	4	8 × 5
GALa 0420	4	17.1	180	3	12 × 9
GALa 0232	2	32.0	180	2	12 × 9

gamma/ L dosing pumps with self-bleeding liquid end

pump type gamma/ L	bar	l/h	strokes/min.	Suction lift mWG	Connector Dimensions outer Ø × inner Ø mm
GALa 1601	16	0.59	180	1.8	6 × 4
GALa 1602	16	1.4	180	2.1	6 × 4
GALa 1005	10	3.6	180	2.7	8 × 5
GALa 0708	7	6.6	180	2.0	8 × 5
GALa 0413	4	10.8	180	2.0	8 × 5
GALa 0220	2	16.2	180	2.0	12 × 9
GALa 1605	16	3.3	180	3.0	8 × 5
GALa 1008	10	6.3	180	3.0	8 × 5
GALa 0713	7	10.5	180	2.5	8 × 5
GALa 0420	4	15.6	180	2.5	12 × 9

Materials on each model in contact with chemicals

	Liquid end	Suction/Discharge Connector	Seals	Balls
PPE	Polypropylene	Polypropylene	EPDM	ceramic
PPB	Polypropylene	Polypropylene	FPM*	ceramic
PVT	PVDF	PVDF	PTFE	ceramic
NPE	acrylic (PMMA)	PVC	EPDM	ceramic
NPB	acrylic (PMMA)	PVC	FPM*	ceramic
TTT	PTFE with carbon	PTFE with carbon	PTFE	ceramic
SST	stainless steel W.No. 1.4404	stainless steel W.No. 1.4404	PTFE	ceramic

DEVELOPAN^® dosing diaphragm with PTFE-coating.
*FPM: Fluoric caoutchouc

Operating instructions - gamma/ L - Solenoid Metering Pump [6,71 MB]

General Operating Instructions - ProMinent® Solenoid Metering Pumps [0,79 MB]

Spare parts List - Beta®/ 4 - Beta®/ 5 - gamma/ L - Liquid Ends and Drive Units [6,05 MB]

Supplementary operating instructions - gamma/ L and Sigma - with power output [0,05 MB]

Supplementary instructions for ProMinent Beta/ 4, Beta/ 5 und gamma/ L, extra-low voltage version [0,04 MB]

[0]

Supplementary operating instructions for gamma/ L and Sigma versions with timer [1,37 MB]

proTime version 1.0.2 - Software to program the Timer of gamma/ L, Sigma/1, Sigma/ 2 and Sigma/ 3 dosing pumps [5,31 MB]

proCon version 1.0.0 - Software to calculate pump settings at proportional dosing applications for pump series gamma/ L, Sigma/1, Sigma/ 2 and Sigma/ 3 [1,4 MB]

Dosing of Chemicals

Process-Timer