Beverage Industry

Suggestions

Products

Requirements - Beverage Industry

Overview
Downloads

Keeping liquids clean

ProMinent simplifies the production and bottling of beverages with precise metering systems and hygiene applications. A high standard of hygiene is ensured at all times and you will quickly cut your system's maintenance costs.

Full control from your PC

Gone are the days when you had to stand at the side of your system to fully see what was going on. ProMinent pumps and controllers are linked directly to the central control system – you control processes from the comfort of your desk.

Any questions? Any questions!

You receive advice from specialists who know their subject. ProMinent technicians fit and start up the systems. It goes without saying that we handle maintenance too. And we've been working this way for 50 years.

Downloads for Beverage Industry

Selected filters:

Matching downloads

Sort by Document type

A bis Z

Load more matches ...

No more matches available!

Unfortunately, we did not find an appropriate match.

All words written correctly?
Search again with fewer or different search terms?

Please try again later

Service Unavailable

The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.

Overview

Keeping liquids clean

Full control from your PC

Any questions? Any questions!

Downloads

Applications - Beverage Industry

Metering of Belt Lubricants

Keeping everything running smoothly in beverage production

Before a bottle is ready to go on the shelf, it passes through many machines in the bottling plant. There is a high price to pay if the belts come to a stop. Metered lubricants ensure smooth running.

CIP - Cleaning In Place

CIP gets to work exactly where it's needed

Small volumes of disinfectant are produced and used on site for sterile machines and process water. Highly concentrated, dangerous chemicals and tedious disassembly are a thing of the past.

Treating Table Water

Thirst-quenching, superior water quality

ProMinent makes sure only the best water ends up in the bottle: free of germs and residue and ready for storage. Professional water treatment removes all undesired organic matter and impurities.

Bottle Washing Machines

Correct metering is key

Perfectly metered cleaning chemicals effectively improve the cleaning quality of bottle washing machines. As an extra bonus, you save energy too.

Rinser Hygiene

Clean bottles and jars

This solution is anything but superficial. Even hard-to-reach places and the inside of glass or PET drinks containers are hygienically cleaned thanks to effective rinser hygiene.

Filler Disinfection / Filler Injection System

Hygienically clean filling in breweries and for beverage manufacturers

You can taste the difference. Optimum filler hygiene removes product residue and reliably eliminates microorganisms, so processes which change the taste can't arise in the first place.

Motor-Driven Metering Pump alpha

Capacity range 1.0 – 30.6 l/h, 10 – 2 bar

The motor-driven metering pump alpha is the metering pump for liquid media and the optimum solution for simple applications. Robust, low-noise, chemical-resistant, with precise metering and good suction capacity.

Solenoid-Driven Metering Pump beta

Capacity range 0.74 – 32 l/h, 25 – 2 bar

All-purpose solenoid-driven metering pump for metering liquid media in water treatment and chemical processes: Solenoid-driven metering pump beta. Cost-effective, overload-proof and adaptable to existing signal transducers.

Solenoid-Driven Metering Pump gamma/ X

Feed rate of product range 1 ml/h – 45 l/h; 25 – 2 bar

The solenoid-driven diaphragm metering pump gamma incorporates a wealth of eX cellent ingenuity! With integrated pressure measurement, it ensures the smooth running of your metering process. The gamma/ X is ideal for all metering work involving liquid media.

Solenoid-Driven Metering Pump gamma/ XL

Feed rate of product range 4 ml/h – 80 l/h; 25 – 2 bar

The gamma/ XL is a smart, connectible solenoid-driven metering pump that is setting new standards in terms of productivity, reliability and cost-effectiveness.

Rotary Lobe Pump ROTADOS

Capacity range 25–100 m³/h, 10–4 bar

The compact rotary lobe pump pumps viscose and even abrasive media at up to 100 m³/h and also with reversible pumping direction thanks to its valveless construction. Housing, plunger and seals are available in different materials to match the medium.

Flow Meter DULCOFLOW

For the measurement of pulsating volumetric flows within the range of 0.03 ml/stroke to 10 ml/stroke

The flow meter DULCOFLOW reliably measures pulsating flows in the range above 0.03 ml/stroke based on the ultrasound measuring principle. The flow meter achieves maximum chemical resistance as all wetted parts are made of PVDF and PTFE.

Peristaltic Pump DULCOFLEX DFDa

Pump capacity up to 35,000 l/h. Back pressure up to 15 bar.

The peristaltic pump DFDa is designed for maximum pump capacities and high pressures and is winning customers over with its noiselessness and long service life. It is fitted with shoes and fabric-reinforced hoses – perfect for industrial use.

Motor-Driven Metering Pump Sigma/ 1 (Basic type)

Capacity range 17 – 144 l/h, 12 – 4 bar

The Sigma/ 1 Basic is an extremely robust motor-driven metering pump with patented multi-layer safety diaphragm for excellent process reliability. It offers a wide range of power end designs, such as three-phase or 1-phase AC motors, also for use in areas at risk from explosion.

Motor-Driven Metering Pump Sigma/ 2 (Basic Type)

Capacity range 50 – 420 l/h, 16 – 4 bar

Robust motor-driven metering pumps like the Sigma/ 2 Basic guarantee excellent process reliability with their patented multi-layer safety diaphragm. The diaphragm metering pump offers a number of power end versions, also suitable for use in areas at risk from explosion.

Motor-Driven Metering Pump Sigma/ 3 (Basic Type)

Capacity range 146 – 1,030 l/h, 12 – 4 bar

The patented multi-layer safety diaphragm for excellent process reliability is just one feature of the extremely robust motor-driven metering pump Sigma/3 Basic. It also offers a wide range of power end versions, such as three-phase or 1-phase AC motors, also for use in ATEX areas.

Motor-Driven Metering Pump Sigma X Control Type – Sigma/ 1 - S1Cb

Capacity range S1Cb: 21 – 117 l/h, 12 – 4 bar

The Sigma control type is a smart motor-driven metering pump that is setting new standards in terms of productivity, reliability and safety.

Motor-Driven Metering Pump Sigma X Control Type – Sigma/ 2 - S2Cb

Capacity range S2Cb: 61 – 353 l/h, 16 – 4 bar

The Sigma control type is a smart motor-driven metering pump that is setting new standards in terms of productivity, reliability and safety.

Motor-Driven Metering Pump Sigma X Control Type – Sigma/ 3 - S3Cb

Capacity range S3Cb: 182 – 1,040 l/h, 12 – 4 bar

The Sigma control type is a smart motor-driven metering pump that is setting new standards in terms of productivity, reliability and safety.

System Solution OZONFILT Compact OMVb

Ozone capacity 20 – 70 g/h

OZONFILT Compact OMVb is a complete, ready-to-use system solution for the generation and metering of ozone.

Storage Tanks

Useful capacity 500 l- 50,000 l, indoor and outdoor installation

Our plastic storage tanks guarantee compliance with statutory specifications taking into account country-specific approvals, which regulate the production and operation of systems for storage and metering of environmentally-hazardous substances.

Metering System DULCODOS eco (DSBa)

For storing and metering liquid chemicals use a selection guide (identity code) to quickly and flexibly adapt your metering system to your metering task.

Turbidity measuring point DULCOTEST DULCO turb C

Measuring range 0 – 1,000 NTU

Turbidity measurements with DULCOTEST DULCO turb C: Compact measuring instrument that uses light scatter to measure turbidity, with a large measuring range and different designs to comply with ISO and EPA standards. Available with or without automatic cleaning.

Controller DULCOMETER D1Cb/D1Cc

The controller DULCOMETER D1Cb/D1Cc can be used for control tasks in potable water treatment, wastewater treatment and many other areas. Safe, convenient and clear, thanks to the large illuminated graphic display, plain text operating menu and pH sensor monitoring.

Controller DULCOMETER Compact

As a controller in water analysis, the DULCOMETER Compact is the correct controller for control tasks that require only a 1-way control.

Transmitter DULCOMETER DMTa

The transmitter DULCOMETER DMTa converts the sensor signals for pH, ORP value, chlorine concentration and conductivity into an interference-insensitive 4-20 mA analogue signal. Flexible, safe and always the optimum resolution of measured value.

Ultrafiltration System DULCOCLEAN UF

8 – 75 m³/h filtrate output

Ultrafiltration system DULCOCLEAN UF reliably and safely uses membrane technology to remove turbidity, particles and microbiological contamination.

Reverse Osmosis System DULCOSMOSE TW

Permeate output 0.1 – 50 m³/h

Reverse osmosis system DULCOSMOSE TW is the all-purpose model for modern potable water desalination. Maximum permeate output at low operating pressures ensures low investment and operating costs.

Photometer

Photometers measure nearly all disinfectants and the pH value based on the photometric principle. They are portable, compact and make safe, simple measurement possible.

DULCOTEST sensors for chlorine dioxide

Graduated measuring ranges 0.01 – 10 mg/l

Chlorine dioxide measurement with DULCOTEST sensors offers precise, reliable, application-specific measured values in real-time for all oxidation and disinfection tasks.

DULCOTEST sensors for chlorite

Graduated measuring ranges 0.02 – 2 mg/l

Chlorite measurements with DULCOTEST sensors in disinfection processes involving chlorine dioxide – high process reliability guaranteed.

DULCOTEST sensors for conductivity

Graduated measuring ranges 0.01 µS/cm – 2,000 mS/cm

Conductivity sensors for optimum process integration: DULCOTEST sensors meet a wide range of measuring requirements and allow the best solution to any given measuring task to be achieved.

DULCOTEST sensors for free chlorine

Graduated measuring ranges 0.01 – 200 mg/l, special measuring range up to 1,000 mg/l

The application-based DULCOTEST sensors for free chlorine deliver precise measured values and a high degree of monitoring and process reliability in any disinfection application.

DULCOTEST sensors for hydrogen peroxide

Graduated measuring ranges 0.2 – 2,000 mg/l, special measuring ranges up to 100,000 mg/l

Hydrogen peroxide measurement with DULCOTEST sensors: Efficient and reliable determination of the concentration of hydrogen peroxide - can be used in a wide range of applications.

DULCOTEST ORP sensors

Typical measuring range -1,500...+1,500 mV; wider ranges are possible depending on the measuring device.

ORP measurements with DULCOTEST sensors: Precise, reliable and application-adapted measured values in real-time. Can be used in water treatment or industrial process waters with strict requirements.

DULCOTEST sensors for ozone

Measuring range 0.02 – 2 mg/l

Measuring ozone in oxidation and disinfection applications: DULCOTEST sensors offer precise, reliable, application-specific measured values in real-time.

DULCOTEST sensors for peracetic acid

Graduated measuring ranges 0.02 – 2,000 mg/l

Measurement of peracetic acid concentration with DULCOTEST sensors: Precise and reliable for disinfection in safety-sensitive applications in the food, pharmaceutical and medical industries. Can also be used in wastewater treatment.

DULCOTEST pH sensors

Graduated pH measuring ranges 0 – 14

pH measurements with DULCOTEST sensors: Precise, reliable and application-adapted measured values in real-time. Control, regulate and monitor chemical processes with the aid of precise measured values.

DULCOTEST temperature sensors

Measuring ranges 0 – 100 °C

Temperature measurement with DULCOTEST sensors: Can be used for direct temperature measurement or temperature compensation during measurement of pH, fluoride, conductivity, chlorine dioxide or hydrogen peroxide.

UV System DULCODES LP certified

Flow up to 406 m³/h

UV system DULCODES LP for drinking water disinfection, comprehensively certified to internationally-recognised DVGW/ÖVGW/SVGW/UVDGM standards. Looking to the future, the systems have already been type-tested in accordance with the latest DIN 19294-1:2020-08 test regulation. Successful certification officially confirms the precise 50-100% control range of the highly efficient VARIO-Flux lamps with dynamic lamp heating.

UV system DULCODES LP F&B

Flow up to 168 m³/h

UV system with hygienic design of radiation chamber. For reliable disinfection and constant quality in your production process.

Ozone System OZONFILT OZVb

Ozone capacity 10 – 70 g ozone/h

OZONFILT OZVb is powerful and compact and is ideal for efficient ozone generation from compressed air in the output range of up to 70 g/h. The turnkey ozone system including mixing equipment offers everything you need for safe and seamless operation.

Ozone System OZONFILT OZMa

Ozone capacity 70 – 420 g ozone/h

OZONFILT OZMa is synonymous with maximum operational safety and minimal operating costs. The ozone generator is maintenance-free and generates up to 420 g/h of ozone from compressed air.

Chlorine Dioxide System Bello Zon CDLb

0 – 120 g/h capacity with storage of up to 60 g of chlorine dioxide for peak metering. Max. flow rate at 0.2 ppm ClO₂ metering capacity of 600 m³/h

Chlorine dioxide system for production of a chlorine-free chlorine dioxide solution, especially suitable for multiple points of injection. Bello Zon CDLb produces ClO₂ discontinuously using the acid/chlorite process with diluted chemicals.

Chlorine Dioxide System Bello Zon CDEb

5-200 g/h chlorine dioxide. Max. flow at 0.2 ppm ClO₂ metering is 1,000 m³/h

Chlorine dioxide system, which continuously produces ClO₂ according to the acid/chlorite method with diluted chemicals. Extremely simple operation, clear construction, analogue control, manual control or via contacts.

Chlorine Dioxide System Bello Zon CDVd

2.5 – 2,000 g/h chlorine dioxide. Maximum volume of water that can be treated with metering of 0.2 ppm ClO₂, depending on the size of the system: 50 - 10,000 m³/h

Chlorine dioxide system for the metering of chlorine dioxide with diluted starting chemicals. The certified yield guarantees efficient chlorine dioxide production. Bello Zon CDVd can be easily and safely integrated into any water treatment process.

Chlorine Dioxide System Bello Zon CDKd

7.5 – 12,000 g/h chlorine dioxide. Maximum volume of water that can be treated with metering of 0.2 ppm ClO₂, depending on the size of the system: 60,000 m³/h

Chlorine dioxide system for the metering of chlorine dioxide with concentrated starting chemicals. The proven safety concept protects people and the environment. The certified yield guarantees efficient chlorine dioxide production. Bello Zon CDKd can be easily and safely integrated into any water treatment process.

NEW

Electrolysis system DULCOLYSE

Output: up to 800 g/h

Efficient production of the highly effective disinfectant DULCOLYT 400 with an exceptionally low chloride and chlorate content. Ideal for particularly sensitive applications in the beverage and food industry, e.g. for the production of baby food. Maximum protection against corrosion and very good cost efficiency.

Chlorine dioxide system Bello Zon CDLb with multiple points of injection

0 – 120 g/h capacity with storage of up to 60 g of chlorine dioxide for peak metering. Max. flow rate at 0.2 ppm ClO₂ metering capacity of 600 m³/h, up to 6 points of injection possible as standard

Flexible solutions for the production and metering of ClO₂ adapted to our customer's tasks, requirements and anticipated pricing.

Nanofiltration System DULCOSMOSE NF

Permeate outputs from 1 to 50 m³/h, higher outputs possible on request

As a nanofiltration system, the DULCOSMOSE NF, a compact and value-for-money unit, can handle partial desalination in industrial applications. Maximum permeate output at low operating pressures ensures low operating costs thanks to the "ultra low pressure" diaphragm.

Measuring and Control System DULCOTROL Potable Water/F&B

Monitoring and treatment of potable and similar types of water with DULCOTROL Potable water/F&B – the compact measuring and control system specially designed for water treatment in waterworks and in the food and beverage industry.

Chlorine dioxide system Bello Zon CDLb H2SO4

8 – 89 g/h chlorine dioxide generation

Bello Zon CDLb H₂SO₄ especially for applications critical with regard to corrosion for the production of low-chloride chlorine dioxide liquid. With the chlorine dioxide system, ClO₂ is produced discontinuously following the acid/chlorite procedure.

Controller DULCOMETER diaLog DACb

Do you wish for a simple controller for water analysis? One that is easy to operate and with which you can freely select between all common measured variables per channel? There is one: our all-rounder DULCOMETER diaLog DACb! What is more, it is Ethernet-/LAN-capable and can be ideally integrated into existing networks.

DULCONNEX API

With DULCONNEX API, you can access your data on request from the DULCONNEX Cloud. Use this for integration into existing process control systems, SCADA, mobile or online apps as well as MES or share data with other digital solutions.

NEW

DULCONNEX Inventory Management

The DULCONNEX Inventory Management add-on is an extension to the DULCONNEX Platform. It can be used to monitor tank levels and inventory levels of chemicals at various sites regardless of your location. Tank level monitoring is based on the data of the DULCOLEVEL radar level sensor.

NEW

Metering system DULCODOS compact

Metering rate: 50 – 1040 l/h

The ready-wired metering system DULCODOS compact is used for the ultra-precise metering of chemicals with a huge range of different motor-driven metering pumps. Thanks to its modular construction, the plug-and-play solution is ideal for replicable installations.

Motor-driven metering pump sigma Hygienic

Capacity range of the Sigma: 25 – 1,000 l/h, 10 – 4 bar

The hygienic design version of the sigma diaphragm metering pumps is optimised in terms of dead space, features as few gaps as possible and has smooth, wetted surfaces for flexible and easy use in hygienically sensitive applications.

Ozone system DULCOZON OZLa

Ozone capacity 380 - 6,080 g ozone/h

DULCOZON OZLa is an ozone generator with low life cycle costs. It combines a high ozone concentration with unbeatable efficiency.

Peristaltic Pump DULCOFLEX DFBa

Pump capacity of up to 800 l/h; back pressures of up to 8 bar.

The peristaltic pump DULCOFLEX DFBa is designed for low and medium pump capacities of up to 800 l/h. Depending on application, the pump can be set for a back pressure of up to 8 bar.

Peristaltic Pump DULCOFLEX DFCa

Pump capacity up to 25,000 l/h. Back pressure up to 8 bar.

High pump capacities are not a problem with the peristaltic pump DULCOFLEX DFCa. It is equipped with extra rollers and fabric-reinforced hoses for industrial use.

Peristaltic pump DULCOFLEX DFXa

Feed rate of 10 ml/h to 65 l/h at up to 7 bar back pressure

DULCOFLEX DFXa meters outgassing, viscous, abrasive or shear-sensitive media and is setting new standards in metering. Linear and reproducible metering (± 1 %) is guaranteed with this peristaltic pump under all process conditions. Hose replacement is a very simple process.

UV System DULCODES LP TL

Flow up to 36 m³/h

The UV system DULCODES LP TL for syrup disinfection declares war on heat-resistant germs. In instances when standard heat pasteurisation isn't up to the job, UV light provides a very quick and efficient form of disinfection without the need for heat.