Suggestions

DULCOTEST sensors for peracetic acid

Graduated measuring ranges 0.02 – 2,000 mg/l

Measurement of peracetic acid concentration with DULCOTEST sensors: Precise and reliable for disinfection in safety-sensitive applications in the food, pharmaceutical and medical industries. Can also be used in waste water treatment.

Product description

Reliable online measurement of peracetic acid with DULCOTEST sensors.

DULCOTEST sensors of types PAA 1 and PAA 2-3E are diaphragm-covered amperometric sensors for the selective measurement of peracetic acid Peracetic acid is particularly used in the food and beverage industry, but also for disinfection in ... more in the glossary. You have the option of two sensor types for applications with different requirements:

Type PAA 1 with extra thick, pore-free diaphragm for average and higher concentrations of peracetic acid Peracetic acid is particularly used in the food and beverage industry, but also for disinfection in ... more in the glossary for applications in the food and beverage industry.

Type PAA 2-3E for low concentrations of peracetic acid Peracetic acid is particularly used in the food and beverage industry, but also for disinfection in ... more in the glossary for monitoring peracetic acid Peracetic acid is particularly used in the food and beverage industry, but also for disinfection in ... more in the glossary limit values in clarification plant processes or for applications in the pharmaceutical industry and medical technology, for example.

Your benefits

  • Precise amperometric measurement in real time for efficient process control
  • Amperometric measuring eliminates interference caused by turbidity or discolouration
  • No cross-sensitivity towards hydrogen peroxide
  • Use of sensors if dissolved matter, surfactants and film-forming media are present without damage to diaphragm
  • Use of sensors under process conditions with CIP (cleaning in place) and rinsers (bottling)
  • Stable zero point means no drift

Field of application

The following list of applications are general examples of generally suitable applications for this product. Please contact your local sales representative to talk about the applicable use of this product in your specific case / environment.

  • CIP (cleaning in place)
  • Bottling
  • Disinfection in pharmaceutical and medical technology
  • Waste water treatment

    Technical Details

    • Type PAA 1: 1 … 200 ppm and 10 … 2,000 ppm
    • Type PAA 2-3E: 0.02 … 2 ppm and 0.2 … 20.0 ppm
    • Conditions of use: temperature up to 45 °C, pressure up to 3 bar (30 °C)

    Peracetic Acid Sensor PAA 1-mA

    Sensor for the measurement of peracetic acid without cross-sensitivity to hydrogen peroxide. For disinfecting contaminated water from washing foodstuffs and from cleaning procedures (e.g. CIP).

    Your Benefits

    • Measured variable: Peracetic acid, without cross-sensitivity towards the accompanying chemical, hydrogen peroxide
    • Diaphragm-covered sensor minimises faults caused by changing flow or ingredients in the water
    • Resistance to films of dirt by pore-free diaphragm

    Measured variable

    Peracetic acid

    Reference method

    Titration

    pH-range

    1.0…9.0

    Temperature

    1…45 °C

    Admissible temperature fluctuation

    0.3 °C/min

    Response time sensor t90

    ≈ 3 min

    Max. pressure

    3.0 bar

    Flow

    DGMa, DLG III: 30...60 l/h
    BAMa: 5...100 l/h (depending on design)

    Supply voltage

    16...24 V DC (2-wire)

    Output signal

    4-20 mA ≈ measuring range, temperature-compensated, uncalibrated, not electrically isolated

    Selectivity

    Peracetic acid selective towards hydrogen peroxide

    Cross sensitivity

    Ozone, chlorine dioxide, chlorine, bromine

    Process integration

    Bypass: open sample water outlet

    Sensor fitting

    BAMa, DGMa, DLG III

    Controllers

    D1C, DAC, AEGIS II, AEGIS X

    Typical applications

    Flushing with Cleaning In Place (CIP), washing vegetables, fruit and meat, rinsers, also suitable for use in the presence of surfactants. The selective measurement of peracetic acid in the presence of hydrogen peroxide is possible.

    Resistance to

    Salts, acids, alkalis, surfactants, dirt films

    Measuring principle, technology

    Amperometric, 2 electrodes, diaphragm-covered

    Measuring range

    Order no.

    PAA 1-mA-200 ppm

    1…200 mg/l

    1022506

    PAA 1-mA-2000 ppm

    10…2,000 mg/l

    1022507

    Note: A mounting kit (order no. 815079) is required for initial fitting of the sensors in the sensor bypass fitting DLG III.

    Peracetic acid sensor PAA 2-3E-mA

    Sensor for measuring even low concentrations of peracetic acid without cross-sensitivity to hydrogen peroxide even in waste water (pre-cleaned)

    Your Benefits

    • Measured variable: peracetic acid, without cross-sensitivity to the accompanying chemical, hydrogen peroxide
    • Low dependence on flow, reduced faults caused by substances in the water and films of dirt, thanks to a membrane protecting the measuring electrodes
    • Sensitive measuring range from 0..02 mg/l provided by potentiometric system containing 3 electrodes
    • Measured values for monitoring or fast control due to short sensor response time < 30 s
    • An integrated transmitter and the signal cable’s plug-in connector make for an easy installation

    Measured variable

    Peracetic acid

    Calibration

    DPD4, titration

    pH-range

    3.0…8.0

    Temperature

    0…40 °C

    Admissible temperature fluctuation

    < 0.3 °C/min

    Response time sensor t90

    < 45 s

    Max. pressure

    3.0 bar

    Electrolytic conductivity

    0.05...50 mS/cm

    Flow

    DGMa, DLG III: 30...60 l/h
    BAMa: 5...100 l/h (depending on design)

    Supply voltage

    16...24 V DC (2-wire)

    Output signal

    4-20 mA ≈ measuring range, temperature-compensated, uncalibrated, not electrically isolated

    Selectivity

    Peracetic acid selective towards hydrogen peroxide

    Cross sensitivity

    Ozone, chlorine dioxide, chlorine, bromine

    Process integration

    Bypass: open outlet or return of the sample water into the process line

    Sensor fitting

    BAMa, DGMa, DLG III

    Controllers

    DAC, D1Cb, AEGIS II, AEGIS X

    Typical applications

    Disinfecting pre-cleaned waste water, measurement and control of low peracetic acid concentrations in the pharmaceutical industry and medical technology.

    Resistance to

    Salts, acids, alkalis, surfactants, dirt films

    Measuring principle, technology

    Amperometric, 3 electrodes, diaphragm-covered

    Measuring range

    Order no.

    PAA 2-3E-mA-2 ppm

    0.02…2.0 mg/l

    1120263

    PAA 2-3E-mA-20 ppm

    0.2…20.0 mg/l

    1119538

    Downloads for DULCOTEST sensors for peracetic acid

    More in the Download Centre

    0 Results
    Filter by document type
    Application Example / Reference (0)
    Brochure / Flyer (0)
    Catalogue (0)
    Certificate / Declaration (0)
    Data Sheet (0)
    Drawing / Dimensional Drawing / 3D (0)
    Exploded View / Spare Parts (0)
    Material Safety Data Sheet (0)
    Operating Instructions (0)
    Others (0)
    Press Release (0)
    Publication / Article (0)
    Software (0)
    Wiring Diagram (0)

    Selected filters:

    Matching downloads

    Sort by A to Z
    Load more matches ...
    No more matches available!

    Unfortunately, we did not find an appropriate match.

    All words written correctly?
    Search again with fewer or different search terms?

    Please try again later

    Service Unavailable

    The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.

    Overview

    Reliable online measurement of peracetic acid with DULCOTEST sensors.

    DULCOTEST sensors of types PAA 1 and PAA 2-3E are diaphragm-covered amperometric sensors for the selective measurement of peracetic acid Peracetic acid is particularly used in the food and beverage industry, but also for disinfection in ... more in the glossary. You have the option of two sensor types for applications with different requirements:

    Type PAA 1 with extra thick, pore-free diaphragm for average and higher concentrations of peracetic acid Peracetic acid is particularly used in the food and beverage industry, but also for disinfection in ... more in the glossary for applications in the food and beverage industry.

    Type PAA 2-3E for low concentrations of peracetic acid Peracetic acid is particularly used in the food and beverage industry, but also for disinfection in ... more in the glossary for monitoring peracetic acid Peracetic acid is particularly used in the food and beverage industry, but also for disinfection in ... more in the glossary limit values in clarification plant processes or for applications in the pharmaceutical industry and medical technology, for example.

    Your benefits

    • Precise amperometric measurement in real time for efficient process control
    • Amperometric measuring eliminates interference caused by turbidity or discolouration
    • No cross-sensitivity towards hydrogen peroxide
    • Use of sensors if dissolved matter, surfactants and film-forming media are present without damage to diaphragm
    • Use of sensors under process conditions with CIP (cleaning in place) and rinsers (bottling)
    • Stable zero point means no drift

    Application

    Technical Data

    Downloads

    Contact us

    Yestin Ng

    Managing Director, ProMinent Fluid Controls (M) Sdn Bhd

    »Please send us your request! We will contact you shortly.«

    +603-8068 2578  Send request   

    Matching Products

    Hydrogen peroxide measurement with DULCOTEST sensors: Efficient and reliable determination of the concentration of hydrogen peroxide - can be used in a wide range of applications.

    more

    Do you wish a simple controller for water analysis? One that is easy to operate and with which you can freely select between all common measured variables per channel? There is one: our all-rounder DULCOMETER diaLog DACb! What is more, it is Ethernet-/LAN-capable and can be ideally integrated into existing networks.

    more

    The controller DULCOMETER D1Cb/D1Cc can be used for control tasks in potable water treatment, waste water treatment and many other areas. Safe, convenient and clear, thanks to the large illuminated graphic display, plain text operating menu and pH sensor monitoring.

    more

    The measuring and control system DULCOMARIN 3 is your digital link to the technology of the future. It controls the entire range of swimming pools – from adventure pools to private pools. The system is operated using the large 7” touch display.

    more

    Controller AEGIS II continuously measures and controls the conductivity and biocide concentration to keep pipework and heat exchangers clean.

    more

    Monitoring and treatment of waste water with DULCOTROL Waste Water – the compact measuring and control system specially designed for applications in municipal and industrial waste water treatment.

    more

    Monitoring and treatment of potable and similar types of water with DULCOTROL Potable water/ F&B – the compact measuring and control system specially designed for water treatment in waterworks and in the food and beverage industry.

    more

    Conductivity sensors for optimum process integration: DULCOTEST sensors meet a wide range of measuring requirements and allow the best solution to any given measuring task to be achieved.

    more

    ProMinent Newsletter - receive latest news, customized for you! subscribe now