Suggestions

Motor-Driven Metering Pump Sigma X Control Type – Sigma/ 1 - S1Cb

Capacity range S1Cb: 21 – 117 l/h, 12 – 4 bar

The Sigma control type is a smart motor-driven metering pump that is setting new standards in terms of productivity, reliability and safety.

Product description

The new Sigma X range – reliable, smart and connectible

The Sigma X diaphragm metering pump covers a capacity range of 21 to 1,040 l/h in versions S1Cb, S2Cb and S3Cb. Its patented multi-layer safety diaphragm guarantees maximum process reliability. Efficient protection of the power end from overloading by means of an integral frequency converter with microprocessor control(ler).

One highlight is the standardised operating concept with click wheel and 4 additional operating keys on a removable operating unit. A large illuminated LCD and a 3-LED display for operating, warning and error messages, visible from all sides, offers additional operating convenience.

The Sigma, like all smart ProMinent metering pumps, can be flexibly connected to various bus systems.

It has a large adjustment range thanks to a combination of frequency and stroke length adjustment. The pump works with high precision across the entire frequency range. Accurate and complication-free metering of viscous and gaseous media by adjustment of the movement profile.

Operating statuses are simply remotely transmitted via an additional output or relay module. A built-in timer, included as standard, controls time-dependent metering cycles.

Relevant spare parts can be shown in the display. The integral logbook significantly improves process management, optimisation and troubleshooting.

Your benefits

  • Safe: In the event of an accident, the feed chemical does not escape to the outside nor into the pump's power end, thanks to the patented multi-layer safety diaphragm with optical signalling (electrical as an option).
  • Integrated relief valve protects the pump against overloading and reliable operation by means of a bleed option during the metering process.
  • External control is scalable via potential-free contacts with pulse step-up and step-down, batch mode or via a 0/4-20 mA standard signal.
  • Can be flexibly networked: Connection to process management systems via integral PROFIBUS®.
  • Integral log book saves up to 300 events and simplifies troubleshooting and analysis of the cause.
  • The use of cookies is required to play this video. Here you can adjust your cookie selection to watch this video.

    Sigma X Family - Module 1 - Introduction

  • The use of cookies is required to play this video. Here you can adjust your cookie selection to watch this video.

    Sigma X Family - Module 2 - higher efficiency

  • The use of cookies is required to play this video. Here you can adjust your cookie selection to watch this video.

    Sigma X Family - Module 3 - higher reliablilty

  • The use of cookies is required to play this video. Here you can adjust your cookie selection to watch this video.

    Sigma X Family - Module 4 - variable metering profiles

  • The use of cookies is required to play this video. Here you can adjust your cookie selection to watch this video.

    Sigma X Family - Module 5 - flexible in use

Field of application

The following list of applications are general examples of generally suitable applications for this product. Please contact your local sales representative to talk about the applicable use of this product in your specific case / environment.

  • All industrial applications, either as a stand-alone unit or integrated in a complete system
  • Volume-proportional addition of chemicals in water treatment, e.g. sodium hypochlorite for the disinfection of potable water
  • Neutralisation in wastewater treatment
  • Pulse-controlled metering in the bottling of different volumes e.g. glycerol filling of manometers
  • With an integrated timer as a control unit for simple processes, e.g. biocide metering in cooling water

    Technical Details

    • Stroke length: 4 mm
    • Stroke length adjustment range: 0 – 100%
    • Stroke length adjustment: manually using self-locking rotary dial in 1 % increments
    • With the right, constant conditions, correct installation and calibration, precision exceeds ±1 %, based on maximum stroke volume.
    • Wetted materials: PVDF, stainless steel 1.4571/1.4404 (special materials on request)
    • Power supply: 1-phase, 100 – 230 V ±10%, 240 V ±6%, 50/60 Hz (110 W)
    • Degree of protection IP 65
    • Fibreglass-reinforced plastic housing
    • The liquid end on the left of the standard version can be selected for special installation situations or in combination with tanks, brackets etc.
    • Manual or external contact mode can be set, factor with external contact control 99:1 – 1:99; batch mode with max. 99,999 strokes/start pulse.
    • Metering profiles for optimum metering results.
    • Display of wear parts in the Service menu.
    • Connector for 2-stage level switch.
    • Connection to PROFINET using the ProMinent DULCOnvert PROFIBUS®-PROFINET converter.
    • Various relay modules can be selected
    • Variants with EU 1935/2004, FDA or hygienic design can be selected for food and other applications. Hygienic design liquid ends are available for applications with stringent hygiene requirements.
    • Customised designs are available on request.

    For reasons of safety, provide suitable overflow devices during installation for all mechanically deflected diaphragm metering pumps.

    Technical Data

    Type

    Capacity at max. back pressure

    Max. stroke rate

    Pump capacity at max. back pressure

    Suction lift

    Perm. pre-pressure suction side

    Connector Suction/Discharge Side

    Shipping weight

    S1Cb

    l/h

    bar

    ml/stroke

    Strokes/min

    gph (US)

    psi

    m WC

    bar

    G-DN

    kg

    12017 PVT

    21

    10

    3.8

    90

    5.5

    145

    7

    1

    3/4–10

    9

    12017 SST

    21

    12

    3.8

    90

    5.5

    174

    7

    1

    3/4–10

    12

    12035 PVT

    42

    10

    4.0

    170

    11.1

    145

    7

    1

    3/4–10

    9

    12035 SST

    42

    12

    4.0

    170

    11.1

    174

    7

    1

    3/4–10

    12

    10050 PVT

    49

    10

    4.0

    200

    12.9

    145

    7

    1

    3/4–10

    9

    10050 SST

    49

    10

    4.0

    200

    12.9

    145

    7

    1

    3/4–10

    12

    10022 PVT

    27

    10

    5.0

    90

    7.1

    145

    6

    1

    3/4–10

    9

    10022 SST

    27

    10

    5.0

    90

    7.1

    145

    6

    1

    3/4–10

    12

    10044 PVT

    53

    10

    5.1

    170

    14.0

    145

    6

    1

    3/4–10

    9

    10044 SST

    53

    10

    5.1

    170

    14.0

    145

    6

    1

    3/4–10

    12

    07065 PVT

    63

    7

    5.2

    200

    16.6

    102

    6

    1

    3/4–10

    9

    07065 SST

    63

    7

    5.2

    200

    16.6

    102

    6

    1

    3/4–10

    12

    07042 PVT

    52

    7

    9.5

    90

    13.7

    102

    3

    1

    1–15

    10

    07042 SST

    52

    7

    9.5

    90

    13.7

    102

    3

    1

    1–15

    14

    04084 PVT

    101

    4

    9.7

    170

    26.7

    58

    3

    1

    1–15

    10

    04084 SST

    101

    4

    9.7

    170

    26.7

    58

    3

    1

    1–15

    14

    04120 PVT

    117

    4

    9.7

    200

    30.9

    58

    3

    1

    1–15

    10

    04120 SST

    117

    4

    9.7

    200

    30.9

    58

    3

    1

    1–15

    14

    Integrated relief valve, connector for DN 10 pressure hose sleeve

    Materials in Contact with the Medium

    Identity code of material

    Dosing head

    Connection on suction/discharge side

    Seals/ball seat

    Balls

    Integral relief valve

    PVT

    PVDF

    PVDF

    PTFE/PTFE

    Ceramic

    PVDF/FKM or EPDM

    SST

    Stainless steel 1.4404

    Stainless steel 1.4581

    PTFE/PTFE

    Stainless steel 1.4404

    Stainless steel/FKM or EPDM

    PVF

    PVDF

    PVDF

    PTFE/PTFE

    Ceramic

    PVDF/FKM or EPDM

    SSF

    Stainless steel 1.4404

    Stainless steel 1.4581

    PTFE/PTFE

    Stainless steel 1.4404

    Stainless steel/FKM or EPDM

    SSG

    Stainless steel 1.4404

    Stainless steel 1.4581

    PTFE/stainless steel 1.4404

    Stainless steel 1.4404

    -

    SSH

    Stainless steel 1.4435

    Stainless steel 1.4435

    EPDM or FKM/stainless steel 1.4435

    Ceramic

    -

    Motor Data

    Identity code specification Power supply  Remarks
    U1-phase, IP 65100 – 230 V ±10 % / 240 V ±6 %50/60 Hz110 WWide-range voltage power unit

    Motors less than 0.75 kW and motors designed for speed-controllable operation are not subject to the IE3 standard in compliance with the Ecodesign Directive 2009/125/EC.

    Downloads for Motor-Driven Metering Pump Sigma X Control Type – Sigma/ 1 - S1Cb

    More in the Download Centre

    0 Results
    Filter by document type
    Application Example / Reference (0)
    Brochure / Flyer (0)
    Catalogue (0)
    Certificate / Declaration (0)
    Data Sheet (0)
    Drawing / Dimensional Drawing / 3D (0)
    Exploded View / Spare Parts (0)
    Material Safety Data Sheet (0)
    Operating Instructions (0)
    Others (0)
    Press Release (0)
    Publication / Article (0)
    Software (0)
    Wiring Diagram (0)

    Selected filters:

    Matching downloads

    Sort by Document type
    Load more matches ...
    No more matches available!

    Unfortunately, we did not find an appropriate match.

    All words written correctly?
    Search again with fewer or different search terms?

    Please try again later

    Service Unavailable

    The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.

    Overview

    The new Sigma X range – reliable, smart and connectible

    The Sigma X diaphragm metering pump covers a capacity range of 21 to 1,040 l/h in versions S1Cb, S2Cb and S3Cb. Its patented multi-layer safety diaphragm guarantees maximum process reliability. Efficient protection of the power end from overloading by means of an integral frequency converter with microprocessor control(ler).

    One highlight is the standardised operating concept with click wheel and 4 additional operating keys on a removable operating unit. A large illuminated LCD and a 3-LED display for operating, warning and error messages, visible from all sides, offers additional operating convenience.

    The Sigma, like all smart ProMinent metering pumps, can be flexibly connected to various bus systems.

    It has a large adjustment range thanks to a combination of frequency and stroke length adjustment. The pump works with high precision across the entire frequency range. Accurate and complication-free metering of viscous and gaseous media by adjustment of the movement profile.

    Operating statuses are simply remotely transmitted via an additional output or relay module. A built-in timer, included as standard, controls time-dependent metering cycles.

    Relevant spare parts can be shown in the display. The integral logbook significantly improves process management, optimisation and troubleshooting.

    Your benefits

    • Safe: In the event of an accident, the feed chemical does not escape to the outside nor into the pump's power end, thanks to the patented multi-layer safety diaphragm with optical signalling (electrical as an option).
    • Integrated relief valve protects the pump against overloading and reliable operation by means of a bleed option during the metering process.
    • External control is scalable via potential-free contacts with pulse step-up and step-down, batch mode or via a 0/4-20 mA standard signal.
    • Can be flexibly networked: Connection to process management systems via integral PROFIBUS®.
    • Integral log book saves up to 300 events and simplifies troubleshooting and analysis of the cause.

    Video

    Application

    Technical Data

    Downloads

    Contact us

    Yestin Ng

    Managing Director, ProMinent Fluid Controls (M) Sdn Bhd

    »Please send us your request! We will contact you shortly.«

    +603-8068 2578  Send request   

    Spare Parts and Accessories

    Matching Products

    The Sigma/ 1 Basic is an extremely robust motor-driven metering pump with patented multi-layer safety diaphragm for excellent process reliability. It offers a wide range of power end designs, such as three-phase or 1-phase AC motors, also for use in areas at risk from explosion.

    more

    Robust motor-driven metering pumps like the Sigma/ 2 Basic guarantee excellent process reliability with their patented multi-layer safety diaphragm. The diaphragm metering pump offers a number of power end versions, also suitable for use in areas at risk from explosion.

    more

    The Sigma control type is a smart motor-driven metering pump that is setting new standards in terms of productivity, reliability and safety.

    more

    The patented multi-layer safety diaphragm for excellent process reliability is just one feature of the extremely robust motor-driven metering pump Sigma/3 Basic. It also offers a wide range of power end versions, such as three-phase or 1-phase AC motors, also for use in ATEX areas.

    more

    The Sigma control type is a smart motor-driven metering pump that is setting new standards in terms of productivity, reliability and safety.

    more

    For storing and metering liquid chemicals use a selection guide (identity code) to quickly and flexibly adapt your metering system to your metering task.

    more

    The controller DULCOMETER D1Cb/D1Cc can be used for control tasks in potable water treatment, wastewater treatment and many other areas. Safe, convenient and clear, thanks to the large illuminated graphic display, plain text operating menu and pH sensor monitoring.

    more

    As a controller in water analysis, the DULCOMETER Compact is the correct controller for control tasks that require only a 1-way control.

    more

    Do you wish for a simple controller for water analysis? One that is easy to operate and with which you can freely select between all common measured variables per channel? There is one: our all-rounder DULCOMETER diaLog DACb! What is more, it is Ethernet-/LAN-capable and can be ideally integrated into existing networks.

    more

    The measuring and control system DULCOMARIN 3 is your digital link to the technology of the future. It controls the entire range of swimming pools – from adventure pools to private pools – and is used as a multi-pool system for up to 16 filter circuits.

    more

    PE storage tanks produced in a rotation process. ProMinent metering pumps, suction lances and stirrers can all be added. The stackable PE collecting pans are available in matching sizes.

    more

    The DULCONNEX Gateway safely and reliably transfers the data of all products supported as standard to the DULCONNEX Cloud

    more

    ProMinent Newsletter - receive latest news, customized for you! subscribe now