Suggestions

UV System DULCODES LP-PE Plastic

Flow up to 505 m3/h

Disinfection of saline/seawater or thermal water with corrosion-resistant reactor the UV system DULCODES LP-PE. The UV system consists of a reactor and a UV sensor made of highly UV-resistant plastic.

Product description

Chemical-free and reliable disinfection of water containing salt, such as seawater or thermal water.

The UV system DULCODES LP-PE plastic is absolutely corrosion-free A system is corrosion-free if it experiences minimal or no wear caused by the reaction of the material in contact with chemicals (e.g. chlorine). more in the glossary. This is ensured by the UV-stabilised, highly compressed HD-PE reactor and a special sensor made of plastic. Thanks to a special welding process, the reactor is temperature-resistant and optimised to a pressure rating of up to 4 bar. Our patented VARIO Flux high-output lamps with dynamic lamp heating are used in our LP-PE systems. We achieve an extremely high UVC efficiency thanks to the unique combination of electronic ballast technology and the VARIO Flux lamps.

Your benefits

  • Reactor made of UV-stabilised high-density HD-PE, absolutely corrosion-free and temperature stable
  • Long-term salt water-resistant UVC sensor for monitoring the disinfection capacity, contamination of the lamp protection tubes, lamp ageing and water transmission
  • Highly efficient VARIO Flux 350 W lamps provide for maximum disinfection and flow rate with a minimum number of lamps.
  • Electronic ballasts for gentle lamp ignition, operation and individual monitoring
  • Replacement lamps are reduced to the absolute minimum
  • System monitoring in real time from any location via the DULCONNEX Platform: Improved process reliability. Reliability and transparency thanks to real-time monitoring, individual alarms and automated reports

Field of application

The following list of applications are general examples of generally suitable applications for this product. Please contact your local sales representative to talk about the applicable use of this product in your specific case / environment.

  • Process water
  • Swimming pool water
  • Salt water

    Technical Details

    • Reactor made of UV-stabilised high-density HD-PE
    • High-performance and highly efficient low-pressure amalgam lamps VARIO Flux with dynamic lamp heating
    • Guaranteed (pro rata) lamp service life: 14,000 hours of operation
    • Long-term stable UVC sensor made of PTFE for continuous monitoring of the system, factory-calibrated in accordance with the DVGW standard.
    • Control cabinet made of coated steel
    • Single-lamp system: equipped with either a Compact controller or Comfort controller UVCb
    • Various options for simple integration of the system in higher-level control systems thanks to many analogue and digital interfaces and connectors
    • Data logger: all relevant operating data and events are saved on the SD card and can be simply and conveniently visualised with an analysis programme.

    Technical Data

    Type

    Max. flow rate

    Lamp power

    Connected load

    Radiation chamber length

    Free space needed for maintenance

    Diameter

    Connector width

    m3/h

    W

    W

    mm

    mm

    mm

    DIN / ANSI

    * permissible operating pressure 3 bar

    1x350 LP-PE

    35

    1x370

    430

    1590

    1565

    140

    DN 80

    2x350 LP-PE

    123

    2x370

    835

    1590

    1565

    280

    DN 125

    3x350 LP-PE

    252

    3x370

    1,240

    1590

    1565

    400

    DN 200

    4x350 LP-PE

    328

    4x370

    1,645

    1590

    1565

    400

    DN 200

    6x350 LP-PE *

    505

    6x370

    2,455

    1590

    1565

    500

    DN 300

    Lamp type

    Low-pressure lamp VARIO Flux

    Control type

    Comfort controller, optionally compact controller

    Permissible operating pressure

    4 bar

    Ambient temperature

    5–40 °C with comfort control, 5–35 °C with compact control

    Permissible water temperature

    5…30 °C

    Enclosure rating

    IP 66

    Downloads for UV System DULCODES LP-PE Plastic

    More in the Download Centre

    0 Results
    Filter by document type
    Application Example / Reference (0)
    Brochure / Flyer (0)
    Catalogue (0)
    Certificate / Declaration (0)
    Data Sheet (0)
    Drawing / Dimensional Drawing / 3D (0)
    Exploded View / Spare Parts (0)
    Material Safety Data Sheet (0)
    Operating Instructions (0)
    Others (0)
    Press Release (0)
    Publication / Article (0)
    Software (0)
    Wiring Diagram (0)

    Selected filters:

    Matching downloads

    Sort by Document type
    Load more matches ...
    No more matches available!

    Unfortunately, we did not find an appropriate match.

    All words written correctly?
    Search again with fewer or different search terms?

    Please try again later

    Service Unavailable

    The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.

    Overview

    Chemical-free and reliable disinfection of water containing salt, such as seawater or thermal water.

    The UV system DULCODES LP-PE plastic is absolutely corrosion-free A system is corrosion-free if it experiences minimal or no wear caused by the reaction of the material in contact with chemicals (e.g. chlorine). more in the glossary. This is ensured by the UV-stabilised, highly compressed HD-PE reactor and a special sensor made of plastic. Thanks to a special welding process, the reactor is temperature-resistant and optimised to a pressure rating of up to 4 bar. Our patented VARIO Flux high-output lamps with dynamic lamp heating are used in our LP-PE systems. We achieve an extremely high UVC efficiency thanks to the unique combination of electronic ballast technology and the VARIO Flux lamps.

    Your benefits

    • Reactor made of UV-stabilised high-density HD-PE, absolutely corrosion-free and temperature stable
    • Long-term salt water-resistant UVC sensor for monitoring the disinfection capacity, contamination of the lamp protection tubes, lamp ageing and water transmission
    • Highly efficient VARIO Flux 350 W lamps provide for maximum disinfection and flow rate with a minimum number of lamps.
    • Electronic ballasts for gentle lamp ignition, operation and individual monitoring
    • Replacement lamps are reduced to the absolute minimum
    • System monitoring in real time from any location via the DULCONNEX Platform: Improved process reliability. Reliability and transparency thanks to real-time monitoring, individual alarms and automated reports

    Application

    Technical Data

    Downloads

    Contact us

    Yestin Ng

    Managing Director, ProMinent Fluid Controls (M) Sdn Bhd

    »Please send us your request! We will contact you shortly.«

    +603-8068 2578  Send request   

    Matching Products

    ProMinent Newsletter - receive latest news, customized for you! subscribe now