Suggestions

Ozone System OZONFILT OZMa

Ozone capacity 70 – 420 g ozone/h

OZONFILT OZMa is synonymous with maximum operational safety and minimal operating costs. The ozone generator is maintenance-free and generates up to 420 g/h of ozone from compressed air.

Product description

Powerful and yet environmentally friendly. Disinfect and oxidise ecologically and economically.

The ozone Significantly less environmentally harmful by-products result from the generation and use of ozone ... more in the glossary systems OZONFILT OZMa are pressurised systems, in which the feed gas – air – is fed into the ozone Significantly less environmentally harmful by-products result from the generation and use of ozone ... more in the glossary generator under pressure.

Air is used as the feed gas in the ozone Significantly less environmentally harmful by-products result from the generation and use of ozone ... more in the glossary system OZONFILT OZMaA type 1 to 6

The ozone Significantly less environmentally harmful by-products result from the generation and use of ozone ... more in the glossary is generated from the oxygen in the ambient air and simultaneously metered. A demand-driven, self-optimising pressure swing dryer reduces the consumption of compressed air to a minimum. Ozone Significantly less environmentally harmful by-products result from the generation and use of ozone ... more in the glossary can therefore be generated safely and reliably even with a high level of ambient air humidity with ozone Significantly less environmentally harmful by-products result from the generation and use of ozone ... more in the glossary concentrations of up to 20 g/Nm3. Using the suitable mixing equipment, ozone Significantly less environmentally harmful by-products result from the generation and use of ozone ... more in the glossary concentrations of between 3 and 12 ppm can be achieved in the water to be treated, depending on the temperature.

Legal notice for operating ozone Significantly less environmentally harmful by-products result from the generation and use of ozone ... more in the glossary systems in Europe:

For legally compliant operation of ozone Significantly less environmentally harmful by-products result from the generation and use of ozone ... more in the glossary systems in Europe, the system must be approved and/or registered in accordance with the Biocidal Products Regulation (EU) No. 528/2012 or REACH Regulation (EC) No. 1907/2006. As a member of EurO3zon, ProMinent automatically provides the necessary approval for biocidal applications in accordance with the Biocidal Products Regulation on behalf of its customers. Other applications will have to be registered in accordance with REACH. This must be done by the operator but assistance can be provided by EurO3zon. For more information, see https://www.prominent.de/resources/Other/German/26231/20210216-Kunden-Info-BPR-REACH.pdf.

Your benefits

  • Economical: maintenance-free generator concept with virtually unlimited service life
  • Up to 30% energy savings for air treatment, thanks to demand-controlled and self-optimising air drying compared to conventional air treatment.
  • Automatic control of the feed gas depends on the ozone output, therefore reduced consumption of feed gas is produced with intensive use of energy.
  • High ozone concentration ensures optimum ozone solubility in water
  • Direct injection without injector system for up to 2 bar back pressure
  • Automatic ozone generation, virtually independent of fluctuations in mains voltage and pressure

Field of application

The following list of applications are general examples of generally suitable applications for this product. Please contact your local sales representative to talk about the applicable use of this product in your specific case / environment.

  • Potable water supply: Oxidation of iron, manganese and arsenic, refinement and taste enhancement and disinfection
  • Wastewater treatment: Degradation/reduction of COD and microcontaminants, reduction of sewage sludge
  • Food and beverage industry: Oxidation of iron and manganese, disinfection of potable water and rinser water
  • Swimming pools: Degradation of disinfection by-products, reliable microbiological barrier and production of crystal-clear water thanks to its microflocculating effect
  • Industry: Legionella prevention and disinfection of cooling water

    Technical Details

    • Compact mounting, ready-to-use in a painted steel cabinet or optionally in a stainless steel cabinet
    • With integrated filter package for the removal of dust and small amounts of residual oil in the compressed air
    • Special dielectric with excellent cooling: in spite of the low cooling water consumption, heat is quickly and efficiently discharged before the ozone produced can decompose due to excessive heat.
    • PLC with integrated ozone measurement and PID control
    • 7" touch panel with data logger and screen plotter
    • Multiple communications interfaces (e.g. LAN, Profibus® DP, ISDN, TCP)
    • Excellent efficiency: over 90% of the ozone is dissolved in the water thanks to the special construction of the mixing unit.
    • Integration of a dew point sensor to monitor the quality of compressed air
    • Integration of an air conditioning unit to adjust the temperature of the ozone system
    • Pause input for external switching on/off
    • Contact input for locking the system, for example in the absence of flow
    • Digital input for connecting a gas detector
    • Digital input for controlling two power stages
    • 0/4-20 mA input for external output control depending on the flow or measured value with a PIC controller
    • Second freely configurable 0/ 4-20 mA input
    • Contact output for operating status
    • Contact output for common alarm message
    • Contact output for limit violation, ozone concentration in the water too low
    • One freely configurable 0/ 4-20 mA output

    Technical Data

    Ozone Generation Systems OZONFILT OZMa 1-3 A (Process Gas - Air)

    Ambient parameters

    Max. 85% air humidity of the ambient air, non-condensing, non-corrosive, dust-free, max. ambient temperature: 40 °C (with integrated air conditioning system: 50 °C)

    OZMa 1A

    OZMa 2A

    OZMa 3A

    Number of modules

    1

    1

    1

    Ozone capacity, measured in accordance with DIN with air at 20 °C, cooling water at 15 °C

    g/h

    70

    105

    140

    Air consumption (only ozone generation)

    Nm3/h

    3.50

    5.25

    7.00

    Ozone concentration in the gas phase referenced to nominal conditions

    g/Nm3

    20

    20

    20

    Specific energy requirement at nominal capacity

    Wh/g

    16.5

    16.5

    16.5

    Power factor at full capacity

    cos φ

    0.95

    0.95

    0.95

    Ozone connection

    Rp 3/8"

    Rp 3/8"

    Rp 3/8"

    Electrical Connection

    OZMa 1A

    OZMa 2A

    OZMa 3A

    Mains connected load V/Hz/A

    V/Hz/A

    230/50;60/10

    230/50;60/16

    230/50;60/16

    Enclosure rating

    IP54

    IP54

    IP54

    Degree of protection with integrated air conditioning unit (internal/external)

    IP 54 / IP 34

    IP 54 / IP 34

    IP 54 / IP 34

    Overall Dimensions (Without Mixer)

    OZMa 1A

    OZMa 2A

    OZMa 3A

    Width

    mm

    1,114

    1,114

    1,114

    Height

    mm

    1,961

    1,961

    1,961

    Depth

    mm

    405

    405

    405

    Weight

    OZMa 1A

    OZMa 2A

    OZMa 3A

    Weight

    kg

    270

    280

    300

    Ozone Mixing

    OZMa 1A

    OZMa 2A

    OZMa 3A

    Max. raw water temperature

    °C

    35

    35

    35

    Pressure at ozone output

    bar

    0.8…2.0

    0.8…2.0

    0.8…2.0

    Air Supply

    OZMa 1A

    OZMa 2A

    OZMa 3A

    Air demand

    Nl/min

    73

    110

    147

    Air quality

    oil and dust-free, non-corrosive, constant priming pressure of 4.5 – 10 bar, max. temperature 40 ° C

    Cooling Water

    OZMa 1A

    OZMa 2A

    OZMa 3A

    Cooling water consumption (15 °C)

    l/h

    90

    135

    180

    Cooling water consumption (30 °C)

    l/h

    125

    190

    250

    Cooling water inlet pressure

    bar

    2…5

    2…5

    2…5

    Cooling water outlet, open discharge

    mm

    8 x 5

    8 x 5

    12 x 9

    Cooling water inlet, PE pressure hose

    mm

    8 x 5

    8 x 5

    12 x 9

    Cooling water quality

    No tendency to form lime scale, no corrosive components; sedimentation substances: < 0.1 ml/l; no particles > 100 µm; iron: < 0.2 mg/l; manganese: < 0.05 mg/l; conductivity: > 100 µS/cm; chloride: < 250 mg/l

    Ozone Generation Systems OZONFILT OZMa 4-6 A (Process Gas - Air)

    Ambient parameters

    Max. 85% air humidity of the ambient air, non-condensing, non-corrosive, dust-free, max. ambient temperature: 40 °C (with integrated air conditioning system: 50 °C)

    OZMa 4A

    OZMa 5A

    OZMa 6A

    * Nm3 = m3 under normal [standard] conditions (p = 1.013 x 105 Pa, T = 273 K)

    Number of modules

    2

    2

    3

    Ozone capacity, measured in accordance with DIN with air at 20 °C, cooling water at 15 °C

    g/h

    210

    280

    420

    Air consumption (only ozone generation)

    Nm3/h

    10.50

    14.00

    21.00

    Ozone concentration in the gas phase referenced to nominal conditions*

    g/Nm3

    20

    20

    20

    Specific energy requirement at nominal capacity

    Wh/g

    16.5

    16.5

    16.5

    Power factor at full capacity

    cos φ

    0.95

    0.95

    0.95

    Ozone connection

    Rp 3/8"

    Rp 3/8"

    Rp 3/8"

    Electrical Connection

    OZMa 4A

    OZMa 5A

    OZMa 6A

    Mains connected load V/Hz/A

    V/Hz/A

    400/50;60/16

    400/50;60/16

    400/50;60/16

    Enclosure rating

    IP54

    IP54

    IP54

    Degree of protection with integrated air conditioning unit (internal/external)

    IP 54 / IP 34

    IP 54 / IP 34

    IP 54 / IP 34

    Overall Dimensions (Without Mixer)

    OZMa 4A

    OZMa 5A

    OZMa 6A

    Width

    mm

    1,320

    1,320

    1,606

    Height

    mm

    1,961

    1,961

    1,961

    Depth

    mm

    605

    605

    605

    Weight

    OZMa 4A

    OZMa 5A

    OZMa 6A

    Weight

    kg

    420

    445

    580

    Ozone Mixing

    OZMa 4A

    OZMa 5A

    OZMa 6A

    Max. raw water temperature

    °C

    35

    35

    35

    Pressure at ozone output

    bar

    0.8…2.0

    0.8…2.0

    0.8…2.0

    Air Supply

    OZMa 4A

    OZMa 5A

    OZMa 6A

    Air demand

    Nl/min

    220

    293

    440

    Air quality

    oil and dust-free, non-corrosive, constant priming pressure of 4.5 – 10 bar, max. temperature 40 ° C

    Cooling Water

    OZMa 4A

    OZMa 5A

    OZMa 6A

    Cooling water consumption (15 °C)

    l/h

    270

    360

    540

    Cooling water consumption (30 °C)

    l/h

    300

    400

    600

    Cooling water inlet pressure

    bar

    2…5

    2…5

    2…5

    Cooling water outlet, open discharge

    mm

    12 x 9

    12 x 9

    12 x 9

    Cooling water inlet, PE pressure hose

    mm

    12 x 9

    12 x 9

    12 x 9

    Cooling water quality

    No tendency to form lime scale, no corrosive components; sedimentation substances: < 0.1 ml/l; no particles > 100 µm; iron: < 0.2 mg/l; manganese: < 0.05 mg/l; conductivity: > 100 µS/cm; chloride: < 250 mg/l

    Downloads for Ozone System OZONFILT OZMa

    More in the Download Centre

    0 Results
    Filter by document type
    Application Example / Reference (0)
    Brochure / Flyer (0)
    Catalogue (0)
    Certificate / Declaration (0)
    Data Sheet (0)
    Drawing / Dimensional Drawing / 3D (0)
    Exploded View / Spare Parts (0)
    Material Safety Data Sheet (0)
    Operating Instructions (0)
    Others (0)
    Press Release (0)
    Publication / Article (0)
    Software (0)
    Wiring Diagram (0)

    Selected filters:

    Matching downloads

    Sort by Document type
    Load more matches ...
    No more matches available!

    Unfortunately, we did not find an appropriate match.

    All words written correctly?
    Search again with fewer or different search terms?

    Please try again later

    Service Unavailable

    The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.

    Overview

    Powerful and yet environmentally friendly. Disinfect and oxidise ecologically and economically.

    The ozone Significantly less environmentally harmful by-products result from the generation and use of ozone ... more in the glossary systems OZONFILT OZMa are pressurised systems, in which the feed gas – air – is fed into the ozone Significantly less environmentally harmful by-products result from the generation and use of ozone ... more in the glossary generator under pressure.

    Air is used as the feed gas in the ozone Significantly less environmentally harmful by-products result from the generation and use of ozone ... more in the glossary system OZONFILT OZMaA type 1 to 6

    The ozone Significantly less environmentally harmful by-products result from the generation and use of ozone ... more in the glossary is generated from the oxygen in the ambient air and simultaneously metered. A demand-driven, self-optimising pressure swing dryer reduces the consumption of compressed air to a minimum. Ozone Significantly less environmentally harmful by-products result from the generation and use of ozone ... more in the glossary can therefore be generated safely and reliably even with a high level of ambient air humidity with ozone Significantly less environmentally harmful by-products result from the generation and use of ozone ... more in the glossary concentrations of up to 20 g/Nm3. Using the suitable mixing equipment, ozone Significantly less environmentally harmful by-products result from the generation and use of ozone ... more in the glossary concentrations of between 3 and 12 ppm can be achieved in the water to be treated, depending on the temperature.

    Legal notice for operating ozone Significantly less environmentally harmful by-products result from the generation and use of ozone ... more in the glossary systems in Europe:

    For legally compliant operation of ozone Significantly less environmentally harmful by-products result from the generation and use of ozone ... more in the glossary systems in Europe, the system must be approved and/or registered in accordance with the Biocidal Products Regulation (EU) No. 528/2012 or REACH Regulation (EC) No. 1907/2006. As a member of EurO3zon, ProMinent automatically provides the necessary approval for biocidal applications in accordance with the Biocidal Products Regulation on behalf of its customers. Other applications will have to be registered in accordance with REACH. This must be done by the operator but assistance can be provided by EurO3zon. For more information, see https://www.prominent.de/resources/Other/German/26231/20210216-Kunden-Info-BPR-REACH.pdf.

    Your benefits

    • Economical: maintenance-free generator concept with virtually unlimited service life
    • Up to 30% energy savings for air treatment, thanks to demand-controlled and self-optimising air drying compared to conventional air treatment.
    • Automatic control of the feed gas depends on the ozone output, therefore reduced consumption of feed gas is produced with intensive use of energy.
    • High ozone concentration ensures optimum ozone solubility in water
    • Direct injection without injector system for up to 2 bar back pressure
    • Automatic ozone generation, virtually independent of fluctuations in mains voltage and pressure

    Application

    Technical Data

    Downloads

    Contact us

    Yestin Ng

    Managing Director, ProMinent Fluid Controls (M) Sdn Bhd

    »Please send us your request! We will contact you shortly.«

    +603-8068 2578  Send request   

    Matching Products

    Disinfection of saline/seawater or thermal water with corrosion-resistant reactor the UV system DULCODES LP-PE. The UV system consists of a reactor and a UV sensor made of highly UV-resistant plastic.

    more

    The controller DULCOMETER D1Cb/D1Cc can be used for control tasks in potable water treatment, wastewater treatment and many other areas. Safe, convenient and clear, thanks to the large illuminated graphic display, plain text operating menu and pH sensor monitoring.

    more

    Do you wish for a simple controller for water analysis? One that is easy to operate and with which you can freely select between all common measured variables per channel? There is one: our all-rounder DULCOMETER diaLog DACb! What is more, it is Ethernet-/LAN-capable and can be ideally integrated into existing networks.

    more

    The measuring and control system DULCOMARIN 3 is your digital link to the technology of the future. It controls the entire range of swimming pools – from adventure pools to private pools – and is used as a multi-pool system for up to 16 filter circuits.

    more

    The UV system works cleanly and with efficient use of energy, based on continuously variable medium pressure lamps, and can therefore automatically compensate for variations in the water quality or level of contamination.

    more

    The unique UV systems DULCODES LP are synonymous with pioneering water treatment – efficient and free of chemicals.

    more

    UV system DULCODES LP for drinking water disinfection, comprehensively certified to internationally-recognised DVGW/ÖVGW/SVGW/UVDGM standards. Looking to the future, the systems have already been type-tested in accordance with the latest DIN 19294-1:2020-08 test regulation. Successful certification officially confirms the precise 50-100% control range of the highly efficient VARIO-Flux lamps with dynamic lamp heating.

    more

    The UV system DULCODES MP eliminates combined chlorine and therefore the odour typically associated with swimming pools. Say goodbye to irritated eyes, nose and skin.Apart from improving the water quality, the low investment costs and high fresh water and energy consumption savings result in short payback times.

    more

    ORP measurements with DULCOTEST sensors: Precise, reliable and application-adapted measured values in real-time. Can be used in water treatment or industrial process waters with strict requirements.

    more

    Measuring ozone in oxidation and disinfection applications: DULCOTEST sensors offer precise, reliable, application-specific measured values in real-time.

    more

    ProMinent Newsletter - receive latest news, customized for you! subscribe now