Suggestions

Immersion Fittings for Sensors

Your sensor is ideally accommodated in the immersion fitting. This fitting ensures optimum measuring conditions.

Product description

Getting stuck in

We offer a range of immersion fittings for specific integration into processes. They hold potentiometric sensors or conductivity sensors and ensure optimum operating conditions for measurement.

Immersion Assembly Type IMA-ICT 2

To hold one inductive conductivity sensor of type ICT 2.

Material

Fitting: Stainless steel 1.4404
Seal: FKM

Max. temperature

125 °C

Max. pressure

10 bar

Installation length

1 m

Immersion lance diameter

70 mm

Flange

Stainless steel flange DN 80 PN 16

Dimensions Table: Flange

FlangeDN 80/PN 16
Ø D200 mm
Ø K160 mm
Ø d28 x 18 mm
b20 mm
Ø a63.5 mm
ScrewsM 16

Order no.

IMA-ICT 2

1023353

Adaptation to processes through flange installation in tank from top.

  • pk_6_094

PP Immersion Assembly Type lPHa 1-PP

Immersion fitting for holding one sensor (e.g. pH, ORP) with PG 13.5 screw-in thread and standard 120 mm length. The inside diameter is sized so that either pH or ORP transducers can be installed. In addition, a stainless steel rod is integrated as a liquid reference potential. The outside diameter is 40 mm. Immersion depths of 1 and 2 m are offered, however customers can independently lengthen or shorten the immersion pipe. The fitting head contains two cable connectors; measuring lines of 3-7 mm diameter can be led out.

Note: Measuring lines are not included in the scope of delivery.

Material

Fitting: PP
Seals: FKM

Max. temperature

80 °C

Pressure

Installation at atmospheric pressure

Immersion depth

Max. 1, or 2 m; variable

Immersion lance diameter

40 mm

Dimensions Table: Flange

Fixed flangeDN 40
Hole circle Ø K110 mm
Screws4 x M16
Thickness d218 mm
Diameter Ø D150 mm

Installation length

Order no.

m

IPHa 1-PP

1

1008600

IPHa 1-PP

2

1008601

Other materials available on request.

FKM = Fluorine Rubber

Accessories for Fitting Type IPHa 1

Order no.

Immersion pipe mounting for IPHa 1-PP

1008624

Clamped threaded connector with fixed flange DN 40 according to DIN 2642 for lPHa 1-PP

1008626

Clamped threaded connector for welding connection for lPHa 1-PP

1008628

Protective (weatherproofed) cover for assembly head for IPHa 1-PP

1008630

Water-retaining basin for IPHa 1-PP

1008632

  • pk_6_080

PP Immersion Assembly Type lPHa 3 -PP

To hold max. three sensors (e.g. pH, ORP, temperature) with PG 13.5 screw-in thread and standard 120 mm length. The inside diameter is dimensioned so that up to three pH, ORP or temperature transducers can be installed. In addition, a stainless steel rod is integrated as a liquid reference potential. The outside diameter is 75 mm. Immersion depths of 1 and 2 m are offered, however customers can shorten the immersion pipe themselves. The fitting head contains four cable connectors; measuring lines of 3-7 mm diameter can be led out. Measuring lines are not included in the scope of delivery. Technical data as for fitting IPHa 1, except the immersion tube diameter is 75 mm.

Material

Fitting: PP
Seals: FKM

Max. temperature

80 °C

Pressure

Installation at atmospheric pressure

Immersion depth

Max. 1, or 2 m; variable

Immersion lance diameter

75 mm

Dimensions Table: Flange

Fixed flangeDN 65
Hole circle Ø K145 mm
Screws4 x M16
Thickness d218 mm
Diameter Ø D185 mm

Installation length

Order no.

m

IPHa 3-PP

1

1008602

IPHa 3-PP

2

1008603

Other materials available on request.

FKM = Fluorine Rubber

Accessories for Fitting Type IPHa 3

Order no.

Immersion pipe mounting for lPHa 3-PP

1008625

Clamped threaded connector with fixed flange DN 65 according to DIN 2642 for lPHa 3-PP

1008627

Clamped threaded connector for welding connection for lPHa 3-PP

1008629

Protective (weatherproofed) cover for assembly head for lPHa 3-PP

1008631

Water-retaining basin for IPHa 3-PP

1008633

  • pk_6_081

PVC Immersion Assembly Type ETS 1 P

Immersion fitting to hold one conductivity, Pt 100, pH or ORP sensor with SN6 plug-in head and PG 13.5 screw-in thread. In addition, a stainless steel rod is integrated as a liquid reference potential.

Sensor connector (inner)

SN6 connector

Signal lead connector (outer)

Coax SN6 male connector

Material

Rigid PVC

Type of fitting

Clamping flange with mounting plate

Immersion depth

Variable

Max. temperature

55 °C

Order no.

ETS 1 P

914950

  • pk_6_064

Immersion Assembly Type TA-LM

To hold one conductivity sensor of type LM and LMP with M 28 thread for side fasting with pipe clips (2 contained in the scope of supply) or with union nut/collar bush/screw-in part for fastening in a tank cover.

Union nut and screw-in part are to supplied by the customer (standard parts).

Material

PP

Max. temperature

70 °C

Enclosure rating

IP 65

Max. pressure

5.0 bar

Immersion lance diameter

32 mm

Pipe length

890 mm

Length

Order no.

mm

TA-LM

890

1020632

Headed bush d50

-

1020634

Extension tube 1000

910

1020633

  • pk_6_053
  • pk_6_078
  • pk_6_079

Downloads for Immersion Fittings for Sensors

More in the Download Centre

0 Results
Filter by document type
Application Example / Reference (0)
Brochure / Flyer (0)
Catalogue (0)
Certificate / Declaration (0)
Data Sheet (0)
Drawing / Dimensional Drawing / 3D (0)
Exploded View / Spare Parts (0)
Material Safety Data Sheet (0)
Operating Instructions (0)
Others (0)
Press Release (0)
Publication / Article (0)
Software (0)
Wiring Diagram (0)

Selected filters:

Matching downloads

Sort by Document type
Load more matches ...
No more matches available!

Unfortunately, we did not find an appropriate match.

All words written correctly?
Search again with fewer or different search terms?

Please try again later

Service Unavailable

The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.

Overview

Getting stuck in

We offer a range of immersion fittings for specific integration into processes. They hold potentiometric sensors or conductivity sensors and ensure optimum operating conditions for measurement.

Technical Data

Downloads

Contact us

Yestin Ng

Managing Director, ProMinent Fluid Controls (M) Sdn Bhd

»Please send us your request! We will contact you shortly.«

+603-8068 2578  Send request   

Matching Products

News and Events

ProMinent Newsletter - receive latest news, customized for you! subscribe now